AUTOMATIC SERVO VOLTAGE STABILIZER
AUTOMATIC VOLTAGE REGULATOR AVR
POWER SUPPLIES鲸AUTOMATIC SERVO VOLTAGE STABILIZER.AVR
BWSVC SERIES - 1kVA ~ 500kVA
Main Features
Wide range of permissible input voltage windows (±20% to ±40%)
Automatic delay output, when the AVR Start Up,it will not output
until the voltage has been stabilized to protect the loads from damage
For Applications
CNC/Medical equipment
Embroidery equipment
Plastic Injection Machine
PCB Drilling Mahine
Printing Press
Electrical Discharge Machining
REMEMBER,Nothing Is More Important For An Electrical, Electronic Device Than a Filtered,Protected And Stable Power Supply Feed. a Correct And Stabilized Voltage Supply Is Very Much Required For The Device To Perform Its Intended Function In The Most Optimized Way. It Is The Voltage Stabilizer Which Ensures That The Device Get The Desired And Stabilized Voltage No Matter How Much The Fluctuation Is. Therefore, Voltage Stabilizer Is a Very Efficient Solution For Anyone Who Desire To Get An Optimum Performance And Protect Their Devices Against These Unpredictable Voltage Fluctuations, Surge And Noise Present In The Supply.
Blue Whale BWSVC series Servo Voltage Stabilizer is designed to regulate voltage automatically – that is to take a fluctuating voltage level and turn it into a constant voltage level.It will also keep the output voltage stable during peak loads, thus helping CNC/PLC/Medical/Laser/Printing equipment and other voltage-sensitive equipment to operate properly.Inbuilt protection also ensures that the load is continuously protected against harmful mains born high energy surges, spikes and transients.
Intended for indoor use only in dry locations, but can be placed in a rain tight enclosure for use in wet or damp locations.
Technical Specification
Capacity
1kVA ~ 500kVA (Select One specific kVA)
Single phase:1/2/3/5/8/10/15/20/30/45/60kVA
Three phase:6/10/15/20/30/40/50/60/80/100/150/200/300/400/500kVA
Input
Single phase
220V ±20%(176V~ 264V) -Standard Type Or 120V±20%(96V~ 144V)-Optional Or 220V ±40%(132V~ 308V) -Optional
Three phase
380V ±20%(304V~ 456V) -Standard Type Or 220V±20%(176V~ 264V)-Optional Or 380V ±40%(228V~ 532V) -Optional
Frequency
50Hz/60Hz
Output
Single phase
220V±2% Or 120V±2%
Three phase
380V±2% Or 220V±2%
Frequency
50Hz/60Hz
Voltage Accuracy
±2%
Efficiency
More than 90%
Distortion
Do not produce additional waveform distortion
Response Time
500ms
Overload
80% continuous,Capable for Peak Current by Inductive Load
Protection
Over current:Electronic detection and circuit breaker dual protection
Over voltage:Output phase voltage is higher than 10℅,cut off the output automatically
Under Voltage:output phase voltage is lower than 10℅,cut off the output automatically
Short circuit:Electronic detection and circuit breaker dual protection
Enclosure IP
IP22 Standard Type IP54 Optional
Display
Input voltage and output voltage
Working condition
Temperature
Operation: -10℃~45℃
Noise
≤ 65dB at 1 meter
Humidity
10~90% non-condensing
Standards
GB 50054-95 GB 50150-1991 GB 50150-2006 GB 50171-1992
GBT 5465.2-2008 GB/T 16935.5-2008 GB/T 16935.4-2011
For more details,please feel free to contact us,thank you！
BWPS Reserves the right to change or modify product design,construction,specification or material without prior notice and without incurring any obligation.
